Revision 0.6
OMAP TM 4 PandaBoard System
Reference Manual
November 29, 2010
DOC-21010
VDDA_DPLL balls (G13, P9 and Y16), and on this revision of the PandaBoard, the VDDS_DV_BANK7
ball (M28). This LDO also provides power for the onboard 38.4 MHz oscillator.
The VDAC LDO is a fixed 1.8V, 50mA LDO that provides a 1.8V input to certain noise sensitive
OMAP4430 balls. The balls powered by this LDO include the VDDA_HDMI_VDAC balls (A11 and
G12).
The VMMC LDO is a programmable LDO that provides the voltage to the VDDS_MMC1 balls on the
OMAP processor (pins G7 and H7) as well as the SDMMC cardcage. This LDO is off when the board is
powered on, but is turned on and set to 1.8V or 3.0V depending on card capabilities detected.
The VRTC LDO is an adjustable LDO that provides internal voltages to the TWL6030 device. Its
possible output voltage settings are 1.8V and 2.5V and its maximum output current is 25mA. In normal
operation, it should always be set to 1.8V.
The VUSB LDO is a fixed 3.3V, 35mA LDO that provides voltage to the OMAP4430 that it uses for its
internal USB transceiver. The only ball powered by this LDO is the VDDA_USBA0OTG_3P3V ball
(ball A5).
The VPP LDO is adjustable LDO that powers the VPP_CUST and VPP_STD balls on OMAP (balls J8
and Y22). This LDO is only needed for eFuse operations and can be left disabled for normal PandaBoard
operation.
2.4.7
TWL6030 Clock Circuitry
The TWL6030 has an 32.768 KHz crystal connected across its OSC32KIN and OSC32KOUT balls. This
crystal is used by the TWL6030 to generate three output 32.768 KHz, 1.8V square wave clock outputs.
These outputs are:
CLK32KAO: always on clock connected to the SYS32K input of the OMAP4430 processor.
CLK32KAUDIO: clock connected to the CLK32K input of the TWL6040 Audio Companion IC.
CLK32KG: a gated 32.768 clock connected to the SLOW_CLK input of the LS Research
module. This clock will be off by default at reset, and must be enabled by software.
2.5
TWL6040 Audio Companion IC
The TWL6040 device is a small (6 x 6 mm, 0.5mm pitch) 120 ball PBGA that provides many functions,
primarily audio, used on the Platform. Shown below is a feature list of the major functions/interfaces
provided by the TWL6040 device.
? A audio management system
o
o
o
PDM Interface for Audio and control
Analog Microphone Interface
Headset – speaker (32 ohm) and microphone
Page 20 of 82
相关PDF资料
UEVM4460G-02-01-00 PANDABOARD ES
UHDM7218BPA PLATE BARRIER 71.86X17.87" GRY
UHDM7218ECA PLATE END 71.86X17.87" GREY
UHDM7218EPA PLATE END 71.86X17.87" GREY
UHDM8418BPA PLATE BARRIER 83.9X17.9X0.1" GRY
UHDM8418ECA PLATE END 83.9X17.9X2.5" GREY
UHDM8418EPA PLATE END 83.87X17.87" GREY
UHDM8424BPA PLATE BARRIER 83.9X23.9X0.1" GRY
相关代理商/技术参数
UEVM4430G-03-00-00 制造商:PandaBoard 功能描述:Development Boards & Kits - ARM PANDABOARD
UEVM4460G-02-01-00 功能描述:开发板和工具包 - ARM PANDABOARD ES RoHS:否 制造商:Arduino 产品:Development Boards 工具用于评估:ATSAM3X8EA-AU 核心:ARM Cortex M3 接口类型:DAC, ICSP, JTAG, UART, USB 工作电源电压:3.3 V
UEVM4460G-02-02-00 制造商:SVTRONICS INC 功能描述:PANDABOARD ES
UEVM5432-G-01-00-00 制造商:SVTRONICS INC 功能描述:EVAL BOARD FOR OMAP 5
UEVM5432G-02-12-00 功能描述:OMAP5432 OMAP? MPU ARM? Cortex?-A15, Cortex?-M4 Embedded Evaluation Board 制造商:svtronics inc. 系列:OMAP? 零件状态:有效 板类型:单板计算机 类型:MPU 核心处理器:ARM? Cortex?-A15,Cortex?-M4 操作系统:Android,Linux 平台:- 配套使用产品/相关产品:OMAP5432 安装类型:固定 内容:板 标准包装:1
UEX220-3U 功能描述:印刷电路板和试验板 EXTENDER 3U UNCOMMIT 3.937X11.75X.062" RoHS:否 制造商:3M Electronic Solutions Division 产品:Jumper & Insulated Wires 描述/功能:Jumper wire, 22 AWG 0.1 inch 长度:0.1 in 宽度:
UEX220-6U 功能描述:EXTENDR UNCOMM 160-PINS 6UX12.2" RoHS:是 类别:盒,外壳,支架 >> 卡架 - 配件 系列:Vectorbord® 标准包装:1 系列:VectorPak™ 附件类型:EFP 模块 适用于相关产品:PCB
UEZ334K100 制造商:THO 功能描述:RMX433X100 THOMSON IN 2103-C